Halo Textured Graphite 2x2 Porcelain Mosaic Tile

Specifications

  • Chip Size

    2" x 2"

  • Size

    11.81" x 11.81"

  • Color

    Black + Dark Gray

  • Material

    Porcelain

  • Finish

    Textured

  • Residential

    Wall | Floor

  • Commercial

    Wall | Floor

  • Made In

    Spain

  • Available Sizes

    11x40, 2x2 Mosaic

  • Shade Variation

    V1

  • Water Absorption

    >10%

  • Chemical Resistant

    Yes

  • Weight

    3.700000

  • Look

    Metallic Look

  • Motif

    Mid Century

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Outdoor Wall, Commercial Floor

(1 sq. ft.)
$24.50 per sq. ft.
In Stock
$49 Shipping
Sq. ft.
or
sheet
How much do I need?
Total Price
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need sheet. We recommend that you order sheet (10% extra) to cover cuts and future repairs.

Add Recommended Grout:
Char Black Non-Sanded Grout
Char Black Non-Sanded Grout 25 lbs
$69.95
per 25 lbs bag

Key Specs

  • Chip Size 2" x 2"
  • Color Gray
  • Material Porcelain
  • Finish Textured
  • Residential Wall | Floor
  • Commercial Wall | Floor
  • Made In Spain

More Items In This Color

Overview

About The TIle: Sparkle and shine with the Halo Graphite Textured Mosaic. A beautiful, modernized take on a classic option, these mosaic pieces in a mystical gray are sure to elevate your design. With prominent swirls of glitter across each sheet, you’ll not only instill a stylish sentiment into your design but will infuse it with a unique texture. Every installation will immediately give off a glamorized feeling with this mosaic.

 

About The Collection: The Halo Collection consists of porcelain tiles that have textured bodies—some with incredible glittery touches. Each piece will add a heightened sense of flair to any space it’s placed, and its durability allows it to be used on both walls as well as floors.     

Specifications

  • Chip Size

    2" x 2"

  • Size

    11.81" x 11.81"

  • Color

    Black + Dark Gray

  • Material

    Porcelain

  • Finish

    Textured

  • Residential

    Wall | Floor

  • Commercial

    Wall | Floor

  • Made In

    Spain

  • Available Sizes

    11x40, 2x2 Mosaic

  • Shade Variation

    V1

  • Water Absorption

    >10%

  • Chemical Resistant

    Yes

  • Weight

    3.700000

  • Look

    Metallic Look

  • Motif

    Mid Century

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Outdoor Wall, Commercial Floor

Specifications

  • Chip Size

    2" x 2"

  • Size

    11.81" x 11.81"

  • Color

    Black + Dark Gray

  • Material

    Porcelain

  • Finish

    Textured

  • Residential

    Wall | Floor

  • Commercial

    Wall | Floor

  • Made In

    Spain

  • Available Sizes

    11x40, 2x2 Mosaic

  • Shade Variation

    V1

  • Water Absorption

    >10%

  • Chemical Resistant

    Yes

  • Weight

    3.700000

  • Look

    Metallic Look

  • Motif

    Mid Century

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Outdoor Wall, Commercial Floor

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16”; and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.
  • The maximum offset percentage for this tile is 25%.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

 

CLEANING

Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces.

 

For cleaning unpolished surfaces, follow these instructions:

  • Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture.
  • Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method.
  • Rinse the floor with clean, clear water to remove the cleaning solution.
  • For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals.

 

  • Always Remember:

    • Do not clean porcelain tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color.
    • Do not use wax, oil-based, abrasive cleaners, or sealants.
    • Agents that contain any dyes or colors are not recommended.
    • Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors.
    • Do not use steel wool pads, because loose steel particles may create rust stains in the grout.

 

Shop This Collection

Copyright © 2021 TileBar. All Rights Reserved.