Marble Tech Crema Avorio 2x2 Matte Porcelain Mosaic Tile

Specifications

  • Chip Size

    2" x 2"

  • Size

    12" x 12"

  • Color

    Creamy Ivory

  • Material

    Porcelain

  • Finish

    Matte

  • Thickness

    10 mm

  • DCOF

    0.45

  • Residential

    Floor | Wall

  • Commercial

    Floor | Wall

  • Made In

    Italy

  • Rectified

    Yes

  • Available Sizes

    12x24", 24x24", 2x2"

  • Shade Variation

    V2

  • PEI Rating

    4

  • Coverage

    1 sq ft

  • Weight

    50.000000

  • Look

    Marble Look

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Commercial Floor

(1 sq. ft.)
$16.95 per sq. ft.
In Stock & Ready to Ship + 365 Day Returns
Sq. ft.
or
sheet
How much do I need?
Total Price
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need sheet. We recommend that you order sheet (10% extra) to cover cuts and future repairs.

Add Recommended Grout:
Bostik White Non-Sanded Grout
White Non-Sanded Grout
$18.00
per 5 lbs bag

Key Specs

  • Chip Size 2" x 2"
  • Color Beige & Cream
  • Material Porcelain
  • Finish Matte
  • Thickness 10 mm
  • Made In Italy
  • DCOF 0.45
  • Residential Floor | Wall
  • Commercial Floor | Wall

Overview

About the Tile: Marble Tech Crema Avorio's striking warm white marble-look tile will elevate your space and leave behind a trail of admirers after they get a glimpse of its beauty. With all the sophistication of real marble delivered in a 2x2 matte porcelain tile. The contrasting tan veining adds another level of powerful appeal to this piece. Use on the floors of your kitchen, or bathroom to captivate and make a spectacular impact.

About the Collection: Inspired by marble, the Marble Tech collection encapsulates the essence of the favorite stone with porcelain. Decorate floors and backsplashes with exceedingly high elegance. Comes in 5 colorways, 2 finishes, and 4 size formats. Bullnose also available.

Specifications

  • Chip Size

    2" x 2"

  • Size

    12" x 12"

  • Color

    Creamy Ivory

  • Material

    Porcelain

  • Finish

    Matte

  • Thickness

    10 mm

  • DCOF

    0.45

  • Residential

    Floor | Wall

  • Commercial

    Floor | Wall

  • Made In

    Italy

  • Rectified

    Yes

  • Available Sizes

    12x24", 24x24", 2x2"

  • Shade Variation

    V2

  • PEI Rating

    4

  • Coverage

    1 sq ft

  • Weight

    50.000000

  • Look

    Marble Look

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Commercial Floor

Specifications

  • Chip Size

    2" x 2"

  • Size

    12" x 12"

  • Color

    Creamy Ivory

  • Material

    Porcelain

  • Finish

    Matte

  • Thickness

    10 mm

  • DCOF

    0.45

  • Residential

    Floor | Wall

  • Commercial

    Floor | Wall

  • Made In

    Italy

  • Rectified

    Yes

  • Available Sizes

    12x24", 24x24", 2x2"

  • Shade Variation

    V2

  • PEI Rating

    4

  • Coverage

    1 sq ft

  • Weight

    50.000000

  • Look

    Marble Look

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Commercial Floor

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16”; and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.
  • The maximum offset percentage for this tile is 25%.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

 

CLEANING

Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces.

 

For cleaning unpolished surfaces, follow these instructions:

  • Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture.
  • Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method.
  • Rinse the floor with clean, clear water to remove the cleaning solution.
  • For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals.

 

  • Always Remember:

    • Do not clean porcelain tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color.
    • Do not use wax, oil-based, abrasive cleaners, or sealants.
    • Agents that contain any dyes or colors are not recommended.
    • Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors.
    • Do not use steel wool pads, because loose steel particles may create rust stains in the grout.

 

My favorites | You've got
Copyright © 2020 TileBar. All Rights Reserved.