Montauk Jet 2x8 Ceramic Bullnose

Specifications

  • Size

    2" x 8"

  • Color

    Black

  • Material

    White Body Ceramic

  • Finish

    Satin

  • Thickness

    9 mm

  • Residential

    Wall Only

  • Made In

    Spain

  • Water Absorption

    < 0.5%

  • MOHS (Scratch Resistant)

    3

  • Chemical Resistant

    Yes

  • Weight

    1.000000

  • Motif

    Beach

  • Tile Use

    Backsplash, Bathroom Wall

$7.25 per piece
In Stock
$49 Shipping
each
Total Price
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need each. We recommend that you order each (10% extra) to cover cuts and future repairs.

Key Specs

  • Size 2" x 8"
  • Color Black
  • Material Ceramic
  • Finish Satin
  • Residential Wall Only
  • Thickness 9 mm
  • Made In Spain

Overview

"Sweet July, and we drove the Montauk Highway
And walked along the cliffs above the sea
And we wondered why, and imagined it was someday
And that is how the future came to be."

 -Dazzling Blue, Paul Simon


 

Inspired by lazy summer weekends spent down at the shore, the Montauk Collection evokes memories of sand between your toes and the smell of saltwater in the air. Available in 5 neutral colorways, Montauk is the perfect choice to add a serene, coastal feel to your space. Each colorway is offered in a 4x4 and 2x8 format making for a plethora of design options. Bullnose is on the 8 inch side.

*Please note that there are two variations of gloss within a box, causing fluctuation in color. For best results, mix the shades before grouting.

Specifications

  • Size

    2" x 8"

  • Color

    Black

  • Material

    White Body Ceramic

  • Finish

    Satin

  • Thickness

    9 mm

  • Residential

    Wall Only

  • Made In

    Spain

  • Water Absorption

    < 0.5%

  • MOHS (Scratch Resistant)

    3

  • Chemical Resistant

    Yes

  • Weight

    1.000000

  • Motif

    Beach

  • Tile Use

    Backsplash, Bathroom Wall

Specifications

  • Size

    2" x 8"

  • Color

    Black

  • Material

    White Body Ceramic

  • Finish

    Satin

  • Thickness

    9 mm

  • Residential

    Wall Only

  • Made In

    Spain

  • Water Absorption

    < 0.5%

  • MOHS (Scratch Resistant)

    3

  • Chemical Resistant

    Yes

  • Weight

    1.000000

  • Motif

    Beach

  • Tile Use

    Backsplash, Bathroom Wall

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16”; and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • This tile is made by hand and is high fired. This causes a considerable amount of variation in size and thickness.  With handmade tile we always recommend larger grout joints to account for these irregularities
  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90
  • Highly recommended to purchase the Unpolished Porcelain Maintenance Kit.

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

Shop This Collection

Copyright © 2021 TileBar. All Rights Reserved.