Park Hill Blue 4x12 Polished Porcelain Bullnose

Ready To Ship

Park Hill Blue 4x12 Polished Porcelain Bullnose

Ready To Ship
$7.99 per Piece
Piece
Total Price: $0.00
$49 Shipping Return Policy
Shipping & Returns

Free Shipping On Samples When You Order 4+

All sample ship for FREE when you order 4 samples or more!

49$ Flat Rate Shipping On Regular Orders

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec id augue at est tincidunt egestas in eget mauris. Donec pharetra ut dui non elementum. Suspendisse rutrum dapibus velit, id vulputate erat. In venenatis lacus velit, quis sodales eros iaculis non. Nam a felis vel turpis suscipit imperdiet. Donec vel iaculis tortor. Fusce sodales elementum neque, eu egestas tellus venenatis in.

Tile Calculator

I know the SQ. FT. area I want to tile.

Calculate the number of tiles I need to order:

Sq. Ft.
Or

I know the SIZE of area I want to tile.

Calculate the number of tiles I need to order:

Feet
Inches
Feet
Inches

You need Piece.

We recommend that you order Piece (10% extra) to cover cuts and future repairs.

Key Specs

  • Size 3.93" x 11.81"
  • Color Blue
  • Material Porcelain
  • Finish Polished
  • Residential Wall Only
  • Made In Portugal
  • Commercial Wall Only
Create a custom tear sheet for your clients

Tearsheet Options

  1. Add your company info to the tearsheet.
Shop Park Hill Blue 4x12 Polished Porcelain Bullnose at Tilebar.com
  • Size

    3.93" x 11.81"

  • Color

    Blue

  • Material

    Porcelain

  • Finish

    Polished

  • Thickness

    8 mm

  • Residential

    Wall Only

  • Commercial

    Wall Only

  • Made In

    Portugal

  • Available Sizes

    3" x 6", 4" x 12"

  • Shade Variation

    V2

  • Water Absorption

    <0.5%

  • Frost Resistant

    Yes

  • Chemical Resistant

    Yes

  • Weight

    5.000000

  • Look

    Subway Tile

  • Tile Use

    Backsplash, Kitchen Wall, Wall Tile, Bathroom Wall, Shower Wall, Outdoor Wall, Pool Tile

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly is recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16” and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8th inches or less.
  • It is recommended to use grout release, then grout the tile, then seal the grout using a sealant such as MP90

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

 

CLEANING

Highly recommended to purchase the Polished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces.

 

For glazed porcelain tiles, use the following instructions for general cleaning:

  • Sweep or vacuum loose dirt and dust from the floor. An untreated dry dust mop is recommended instead of a broom.
  • Mop the floor with a mild cleaning solution (do not use wax, oil-based, or abrasive cleaners).
  • Rinse the tile thoroughly with clean and clear water.
  • Drying is also recommended – to increase the shine and to prevent water spots.

 

  • Always Remember:

    • Do not clean porcelain tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color.
    • Do not use wax, oil-based, abrasive cleaners, or sealants.
    • Agents that contain any dyes or colors are not recommended.
    • Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors.
    • Do not use steel wool pads, because loose steel particles may create rust stains in the grout.

Copyright © 2021 TileBar. All Rights Reserved.