Quill Basil Polished Ceramic Mosaic Tile

Ready To Ship

Quill Basil Polished Ceramic Mosaic Tile

Ready To Ship
$25.93
per Sheet (1.13 sq. ft.)
As Low as
$22.95 per sq. ft.
How much do I need?
Sq. ft
Sheet
Total Price: $0.00
$49 Shipping Return Policy
Shipping & Returns

Free Shipping On Samples When You Order 4+

All sample ship for FREE when you order 4 samples or more!

49$ Flat Rate Shipping On Regular Orders

Lorem ipsum dolor sit amet, consectetur adipiscing elit. Donec id augue at est tincidunt egestas in eget mauris. Donec pharetra ut dui non elementum. Suspendisse rutrum dapibus velit, id vulputate erat. In venenatis lacus velit, quis sodales eros iaculis non. Nam a felis vel turpis suscipit imperdiet. Donec vel iaculis tortor. Fusce sodales elementum neque, eu egestas tellus venenatis in.

Recommended Grout
Laticrete Permacolor Bright White Grout- 8 lb
Laticrete Permacolor Bright White Grout- 8 Lb
$29.99
1 Box of grout covers approximately:

How much grout do I need?

Here’s a helpful chart that will show you how many square feet each box of grout covers.

Mosaic Chip Size Grout Coverage
1" x 1" 35 sq. ft.
1/2" x 1/2" 18 sq. ft.
5/8" x 5/8" 25 sq. ft.
1" x 2" 45 sq. ft.
2" x 2" 60 sq. ft.
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Tile Calculator

I know the SQ. FT. area I want to tile.

Calculate the number of tiles I need to order:

Sq. Ft.
Or

I know the SIZE of area I want to tile.

Calculate the number of tiles I need to order:

Feet
Inches
Feet
Inches

You need Sheet.

We recommend that you order Sheet (10% extra) to cover cuts and future repairs.

Key Specs

  • Chip Size 2" x 4.3"
  • Color Green
  • Material Ceramic
  • Finish Polished
  • Residential Wall Only
  • Commercial Wall Only
Create a custom tear sheet for your clients

Tearsheet Options

  1. Add your company info to the tearsheet.

About the Tile: With its feather-like characteristics, the Quill Basil Polished Ceramic Tile is appropriately named. Featuring 3-Dimensional textural ridges and lines, it turns any wall into a stunning sculptural piece. The gorgeous, sky blue coloring pops on the tile's surface. Use in any space for an old-world feel.

About the Collection: The Quill Collection consists of 3-Dimensional tiles that act more as an artistic installation than home décor pieces. Made from ceramic, theses tiles will add a unique character to any design. For interior walls only. Available in 3 colors and 2 finishes. 

  • Chip Size

    2" x 4.3"

  • Size

    12.75" x 12.8"

  • Color

    Light Blue + Light Green + White

  • Material

    Ceramic

  • Finish

    Polished

  • Thickness

    Low 12 mm, High 21 mm

  • Residential

    Wall Only

  • Commercial

    Wall Only

  • Rectified

    No

  • Shade Variation

    V3

  • Water Absorption

    0.07%

  • Frost Resistant

    Yes

  • Chemical Resistant

    Yes

  • Coverage

    1.13 sq ft

  • Weight

    5.200000

  • Look

    3D

  • Style

    Beach, Mid Century, Tropical

  • Location

    Backsplash, Bathroom, Indoor, Kitchen

  • Tile Use

    Backsplash, Kitchen Wall, Wall Tile, Bathroom Wall

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16”; and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

 

CLEANING

Highly recommended to purchase the Polished Ceramic Maintenance Kit. Ceramic tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your ceramic tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although ceramic tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean ceramic tile surfaces.

 

For cleaning unpolished surfaces, follow these instructions:

  • Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture.
  • Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method.
  • Rinse the floor with clean, clear water to remove the cleaning solution.
  • For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals.

 

  • Always Remember:

    • Do not clean tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color.
    • Do not use wax, oil-based, abrasive cleaners, or sealants.
    • Agents that contain any dyes or colors are not recommended.
    • Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors.
    • Do not use steel wool pads, because loose steel particles may create rust stains in the grout.
Copyright © 2021 TileBar. All Rights Reserved.