Sculpt Chevron White 24x48 Natural Porcelain Tile

Specifications

  • Size

    23.42" x 47.04"

  • Color

    White

  • Material

    Porcelain Stoneware

  • Finish

    Natural

  • Thickness

    9 mm

  • DCOF

    0.67

  • Residential

    Wall | Floor

  • Commercial

    Wall | Floor

  • Made In

    Italy

  • Rectified

    Yes

  • Shade Variation

    V3-V4

  • PEI Rating

    4

  • Frost Resistant

    Yes

  • Chemical Resistant

    Yes

  • Breaking Strength

    > 1700 N

  • Coverage

    7.65 Sq ft

  • Pieces Per Box

    2

  • Sq Ft Per Box

    15.49

  • Weight

    50.000000

  • Look

    Concrete Look

  • Style

    Craftsman, Mediterranean

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Outdoor Floor, Outdoor Wall, Commercial Floor, Pool Tile

  • Tile Faces

    10

  • New
$147.15
per box (15.49 sq. ft.)
$9.50 per sq. ft.
As Low as per sq. ft.
  • Buy 7 boxes at $8.79 per sq. ft and save 8%
  • Buy 24 boxes at $8.35 per sq. ft and save 12%
In Stock
$49 Shipping
Sq. ft.
or
box
How much do I need?
Total Price
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need box. We recommend that you order box (10% extra) to cover cuts and future repairs.

Key Specs

  • Size 23.42" x 47.04"
  • Color White
  • Material Porcelain
  • Finish Natural
  • Residential Wall | Floor
  • Thickness 9 mm
  • Commercial Wall | Floor
  • Made In Italy
  • DCOF 0.67

Overview

About The Collection: Inspired by the sculptural terraces and cobbled streets of Italy, the Sculpt Collection creates a dramatically new visual, breathing new life into an ancient design. These large-format 24” x 48 " porcelain tiles replicate the sun-baked appearance of terra cotta with soft color variations and a natural finish, while the chevron pattern provides a modern iteration to this timeless classic. This collection is available in 4 colorways, with 2 earthy colorways that reinforce the traditional Italian terra cotta style alongside white and gray options that provide a modern minimalist aesthetic. The Sculpt tiles fuse old-world charm with contemporary lines and cutting-edge porcelain technology, resulting in an elegant series that can complement any decor and are suitable for walls or floors in commercial and residential spaces.

 

About The Tile: The Sculpt White tiles redefine the terra cotta look as a modern and minimalist design. Combining an elegant chevron pattern with an all-white color palette and a natural finish, these large-format 24” x 48 " porcelain tiles preserve the old worn appearance of sun-baked clay and elevate it to a contemporary aesthetic with an urban edge.

Specifications

  • Size

    23.42" x 47.04"

  • Color

    White

  • Material

    Porcelain Stoneware

  • Finish

    Natural

  • Thickness

    9 mm

  • DCOF

    0.67

  • Residential

    Wall | Floor

  • Commercial

    Wall | Floor

  • Made In

    Italy

  • Rectified

    Yes

  • Shade Variation

    V3-V4

  • PEI Rating

    4

  • Frost Resistant

    Yes

  • Chemical Resistant

    Yes

  • Breaking Strength

    > 1700 N

  • Coverage

    7.65 Sq ft

  • Pieces Per Box

    2

  • Sq Ft Per Box

    15.49

  • Weight

    50.000000

  • Look

    Concrete Look

  • Style

    Craftsman, Mediterranean

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Outdoor Floor, Outdoor Wall, Commercial Floor, Pool Tile

  • Tile Faces

    10

Specifications

  • Size

    23.42" x 47.04"

  • Color

    White

  • Material

    Porcelain Stoneware

  • Finish

    Natural

  • Thickness

    9 mm

  • DCOF

    0.67

  • Residential

    Wall | Floor

  • Commercial

    Wall | Floor

  • Made In

    Italy

  • Rectified

    Yes

  • Shade Variation

    V3-V4

  • PEI Rating

    4

  • Frost Resistant

    Yes

  • Chemical Resistant

    Yes

  • Breaking Strength

    > 1700 N

  • Coverage

    7.65 Sq ft

  • Pieces Per Box

    2

  • Sq Ft Per Box

    15.49

  • Weight

    50.000000

  • Look

    Concrete Look

  • Style

    Craftsman, Mediterranean

  • Tile Use

    Backsplash, Floor Tile, Wall Tile, Bathroom Floor, Bathroom Wall, Shower Wall, Shower Floor, Outdoor Floor, Outdoor Wall, Commercial Floor, Pool Tile

  • Tile Faces

    10

*These are just guidelines. Please refer to and install our products to the standards set by the TCNA.

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16”; and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8 inch or smaller.
  • It is recommended to use grout release, then grout the tile, then seal the grout using a sealant such as MP90

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

 

CLEANING

Highly recommended to purchase the Unpolished Porcelain Maintenance Kit. Porcelain tile is resistant to germs and bacteria and it is also among the easiest of flooring materials to clean. You can clean your porcelain tile with a damp sponge mop. A solution of 1/4 cup of white vinegar to 2 gallons of water works best – allow time for drying. You can also sweep or vacuum. Although porcelain tile is by definition impervious, it is still possible for its surface to discolor. The following instructions explain how to clean porcelain tile surfaces.

 

For cleaning unpolished surfaces, follow these instructions:

  • Sweep or vacuum dust and debris from the floor. When sweeping, use a soft-bristle broom and sweep in 2 directions. First follow the direction of the tile, and then sweep diagonally. This will ensure the removal of all foreign material that might be residing in the texture.
  • Saturate the tile with a neutral cleaning solution, such as vinegar, with hot water and stir. Allow the cleaning solution to remain on the floor 5 – 10 minutes. Scrub the floor with a brush; again using a two-direction method.
  • Rinse the floor with clean, clear water to remove the cleaning solution.
  • For high traffic locations, it is recommended to clean the floor at least once per day and wet mop at regular intervals.

 

  • Always Remember:

    • Do not clean tile flooring with ammonia or with cleaners that contain bleach and/or acid. Acid and ammonia based cleaners may modify grout color.
    • Do not use wax, oil-based, abrasive cleaners, or sealants.
    • Agents that contain any dyes or colors are not recommended.
    • Use rugs at entrances to prevent dirt and grit from being tracked onto the tile flooring from outdoors.
    • Do not use steel wool pads, because loose steel particles may create rust stains in the grout.

 

Copyright © 2021 TileBar. All Rights Reserved.