Lancaster Bristol Open Seas Polished Ceramic Pencil Liner

Specifications

  • Size

    .75" x 12"

  • Color

    Sea Green

  • Material

    Ceramic

  • Finish

    Polished

  • Thickness

    15 mm

  • Residential

    Wall Only

  • Commercial

    Wall Only

  • Weight

    0.337500

  • Tile Use

    Backsplash, Wall Tile, Bathroom Wall

$9.95 per piece
In Stock & Ready to Ship + 365 Day Returns
piece
Total Price
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Starting a new project?
Get 5 samples for $5. Free, fast shipping!
Add 5 more samples to get 5 samples for $5
Tile Calculator
  • I know the sq. ft. area I want to tile. Calculate the number of tiles I need to order:

  • I know the size of the area I want to tile. Calculate the number of tiles I need to order:

You need piece. We recommend that you order piece (10% extra) to cover cuts and future repairs.

Add Recommended Grout:
Bostik Dimension Diamond Grout
Dimension Diamond Grout 9 lbs
$120.00
per 9 lbs bucket

Key Specs

  • Size .75" x 12"
  • Color Green
  • Material Ceramic
  • Finish Polished
  • Thickness 15 mm
  • Residential Wall Only
  • Commercial Wall Only

Overview

Bristol Open Seas Polished Ceramic Pencil Liners

Designed to coordinate beautifully with your ceramic, natural stone or glass tiles. This pencil liner will enhance any wall-tile application.

Specifications

  • Size

    .75" x 12"

  • Color

    Sea Green

  • Material

    Ceramic

  • Finish

    Polished

  • Thickness

    15 mm

  • Residential

    Wall Only

  • Commercial

    Wall Only

  • Weight

    0.337500

  • Tile Use

    Backsplash, Wall Tile, Bathroom Wall

Specifications

  • Size

    .75" x 12"

  • Color

    Sea Green

  • Material

    Ceramic

  • Finish

    Polished

  • Thickness

    15 mm

  • Residential

    Wall Only

  • Commercial

    Wall Only

  • Weight

    0.337500

  • Tile Use

    Backsplash, Wall Tile, Bathroom Wall

SUBSTRATE

Tile must be installed over a suitable substrate to insure a proper installation. Tile should be installed over a clean, sound, and flat surface, free of contaminates including curing compounds. Substrate should be free of cracks. If used in a wet area you must waterproof. See manufacturer's recommendation on a membrane for crack and water protection that is compatible with the setting material you are using. Expansion joints should be installed at all changes in plane in the tile work and where tile abuts restraining surfaces, therefore silicone caulking sealant must be installed in all corner joints in place of grout.

 

INSTALLATION

  • We always recommend dry-fitting your pattern first to think about your cuts in advance and to make sure you like the pattern. This will also help you choose which pieces go where, which is especially helpful with tiles that have a lot of variation.
  • To avoid affecting the color of the tile, white thinset such as Bostik PM is highly is recommended for all installations. For faster installation, use a rapid curing thinset such as Bostik Single-Flex Fast Set.
  • Apply as much adhesive as can be covered within 10-15 minutes. 
  • Grout joint should be a minimum of 1/16” and not butt set.
  • The optimal trowel size is a 9" Trowel - 1/8" square notch.

 

GROUTING

  • This tile is made by hand and is high fired. This causes a considerable amount of variation in size and thickness.  With handmade tile we always recommend larger grout joints to account for these irregularities.
  • Grout joints should be packed full and free of voids and pits.
  • Clean excess grout as the work progresses before it has hardened completely.
  • Acids should never be used for cleaning grout haze.
  • Use a damp sponge for the final cleaning and to smooth out the grout joints.
  • Both Sanded and Non-Sanded grouts are acceptable for use. We recommend Sanded grout for joints larger than 1/8 inch and Non-Sanded for 1/8th inches or less.
  • It is recommended to use grout release, then grout the tile, then use a sealant to the tile such as MP90
  • Highly recommended to purchase the Polished Porcelain Maintenance Kit.

 

CUTTING

The recommended cutting method is to use a wet saw with a diamond blade. Edges can be sanded smooth after cutting.

My favorites | You've got
Copyright © 2020 TileBar. All Rights Reserved.